Home > Buy Now > Plastic Products > Plastic Tubes > Gas Appliance Flexible Hose

corruaged hose

Water Supply Hose->Water Hose

Gas Application Hose->Gas Appliance Flexible Hose

1Refrigeration Application Hose

Other Hose

Company Profile

Selling Leads

Shenzhen Yeaming Industry Co.,Ltd
[China]

Address:
B Xinghe International Building, No3 FuFua Rd, Futian District , shenzhen ,China Shenzhen Guangdong 518109 China

Phone:
86-755-81195618

Contact name:
Eric Liu , sales manager

Shenzhen Yeaming Industry Co.,Ltd

Gas Application Hose->Gas Appliance Flexible Hose

	Gas Appliance Flexible Hose

Click to enlarge image

Model Number

YM-7503Q

Gas Application Hose->Gas Appliance Flexible Hose
Gas hose for home appliance
Introduction:
Gas hose for home appliance is especially applied to the connection between cooking appliance and gas valve at the end of gas transmitting pipe, which surely sees promising marketing prospect. Owning the advantages of anti-corrosion, good sealing, nice appearance, long using duration and convenient installation& disconnection, and high flexibility, it can greatly avoid the occurrences of aging, leakage, toxicosis and explosion etc., which usually arise from the use of rubber hoses.
Drawing:

Specification:
Item No. DN Thread Type Seal Type
RQ-08-SM18X1.5-G1/2 DN08 One end Female M18X1.5; one end Female G1/2�. Two ends flat-sealed by rubber gaskets.
RQ-08-SG1/2-C9.5 DN08 One end Insert φ12mm(I.D); one end Female G1/2�. One end insert-sealed by rubber gasket, one end flat-sealed by rubber gasket.
RQ-08-C9.5 DN08 Two ends Insert φ12mm(I.D). Two ends insert-sealed by rubber gasket.
RQ-08-SG1/2 DN08 Two ends Female G1/2�. Two ends flat-sealed by rubber gaskets.
RQ-10-SG1/2 DN10 Two ends Female G1/2�. Two ends flat-sealed by rubber gaskets.
Characteristics:
1.Anti-aging,taint-resistant:SUS304/SUS316L;
2.Safety guarantee:insurance covered by PICC;
3.Quality guarantee:ISO9001 certification;
4.Cautery-resistant:SUSS304,HP59 copper with chrome plate;
5.Flexibility:annular corrugation,it can be bent at any direction 10 times upon large than the minimum bend radius;
6.Inspection department:china Gas Appliances inspection Center;
Installation Instruction:
1.Select applicable type and length;
2.Put the nuts on hose in advance before installation and make sure rubber gaskets in the ports are all right;
3.Turm off gas switch before installation;
4.When turning the nuts ,try to avoid any violence ,which may destroy the rubber gaskes;
5.Using soap water to check whether there is a leakage after installation;
6.Special design and manufacture can be done according to client's requirement.